CERC Rejects Plea to Approve Tariff for 300 MW Wind-Solar Projects

MHI Announces Demand Incentives for Electric Trucks Under PM E-Drive

RECPDCL Signs Agreements for Installing 3.32 Million Smart Meters in Gujarat

Rajasthan Commission Approves Tariffs for 82 MW Solar Projects Under KUSUM

Karnataka Sets Benchmark Tariff of ₹3.07/kWh for MW-Scale Solar Projects

Daily News Wrap-Up: MNRE Clarifies ALMM Norms for Behind-the-Meter Projects

REMCL Floats Tender for 3 MW Solar Project in Noida

JK Tyre to Source 5 MW of Renewable Energy from STTY RE

MNRE Issues Clarifications on ALMM Mandate for Behind-the-Meter Projects

Himachal Electricity Regulator Finalizes Resource Adequacy Framework Regulations


					<table id="amazon-polly-audio-table">
						<tr>
						<td id="amazon-polly-audio-tab">
							<div id="amazon-ai-player-label">Listen to this article</div>
							<div id="amazon-ai-player-container">
			<audio class="amazon-ai-player" id="amazon-ai-player" preload="none" controls   controlsList="nodownload" >
				<source type="audio/mpeg" src="https://cms.mercomindia.com/wp-content/uploads/2025/07/amazon_polly_81831.mp3?version=1752152187">
			</audio>
		</div>
							<div id="amazon-polly-subscribe-tab"></div>
							<div id="amazon-polly-by-tab"></div>
						</td>
						</tr>
					</table><p>The Ministry of New and Renewable Energy (<a href="https://mnre.gov.in/" target="_blank" rel="noopener">MNRE</a>) has clarified that behind-the-meter projects for captive consumption by government entities or public sector enterprises must use solar modules from the Approved List of Models and Manufacturers (ALMM).</p>
<p>However, these projects are exempt from using ALMM-compliant cells if they were commissioned before June 1, 2026. Projects commissioned after this deadline must use ALMM-listed modules and cells.</p>
<p>This clarification follows a query from stakeholders who sought to confirm whether compliance with the ALMM list for solar cells is not required for behind-the-meter connections commissioned before June 1, 2026, and executed under the renewable energy service company or capital expenditure modes for self-consumption purposes.</p>
<p>In 2022, MNRE exempted behind-the-meter solar projects solely used for captive consumption by a consumer or group of consumers.</p>
<p>The Ministry clarified that this exemption does not apply to behind-the-meter connections for captive consumption by government entities or public sector enterprises, as government projects have been covered under ALMM from the beginning.</p>
<p>As of June this year, ALMM approved module capacity <a href="https://www.mercomindia.com/almm-authorized-solar-module-manufacturing-capacity-rises-by-2-98-gw" target="_blank" rel="noopener">stood</a> at 90.95 GW. The Ministry updated the ALMM by adding 2,988 MW of solar module manufacturing capacity. The total number of module manufacturers has now increased to 105.</p>
<p>Reliance Industries is the latest addition to the ALMM list, with a capacity of 1,716 MW. Avaada Electro increased its capacity by adding 1,272 MW.</p>
<p>In May, MNRE <a href="https://www.mercomindia.com/mnre-issues-clarifications-on-enlisting-solar-cells-in-almm" target="_blank" rel="noopener">issued</a> clarifications on solar cells in the ALMM. It clarified that it would treat potential induced degradation (PID) and non-PID cells as different products or families and list them separately.</p>
<p>In March, MNRE <a href="https://www.mercomindia.com/mnre-clarifies-net-billing-and-metering-provisions-under-almm" target="_blank" rel="noopener">clarified</a> that net billing, virtual, and group net metering will also be treated on par with net metering provisions under ALMM List-II.</p>
<p>Last year, the Ministry clarified that the List II <a href="https://www.mercomindia.com/list-ii-for-solar-cells-into-force-from-june-2026" target="_blank" rel="noopener">applies </a>to solar cells, which will be brought under the ambit of ALMM from June 2026. The inclusion of solar cells in ALMM aims to increase the  domestic production capacity of solar cells.</p>



					<table id="amazon-polly-audio-table">
						<tr>
						<td id="amazon-polly-audio-tab">
							<div id="amazon-ai-player-label">Listen to this article</div>
							<div id="amazon-ai-player-container">
			<audio class="amazon-ai-player" id="amazon-ai-player" preload="none" controls   controlsList="nodownload" >
				<source type="audio/mpeg" src="https://cms.mercomindia.com/wp-content/uploads/2023/11/amazon_polly_60513.mp3?version=1700732461">
			</audio>
		</div>
							<div id="amazon-polly-subscribe-tab"></div>
							<div id="amazon-polly-by-tab"></div>
						</td>
						</tr>
					</table><p>The Maharashtra Electricity Regulatory Commission (<a href="https://merc.gov.in/" target="_blank" rel="noopener">MERC</a>) has increased the net metering cap for rooftop solar power projects to either 5 MW or the consumer’s contract demand/ sanction load, whichever is lower. Net metering in the state was earlier capped at less than 1 MW.</p>
<p>The increase in the net metering cap comes across as an effort to encourage the adoption of commercial and industrial rooftop installations.</p>
<p>The Commission has also allowed consumers to opt for group net metering, net billing, or behind-the-meter connection.</p>
<p>The amendments are a part of the latest Maharashtra Electricity Regulatory Commission (Grid Interactive Rooftop Renewable Energy Generating Systems) (First Amendment) Regulations, 2023.</p>
<p>According to the proposed amendments, an eligible consumer is an electricity consumer within the distribution company’s (DISCOM) service area who uses or intends to use a renewable energy generation system. The system can be situated on its rooftop or another support structure on its premises. This definition encompasses consumers who collectively utilize a shared load, such as those within a housing society.</p>
<p><strong>Grid Support Charges</strong></p>
<p>The Commission has clarified that grid support charges will not be imposed until the total installed rooftop capacity in the state reaches 5 GW. However,  DISCOMs can approach the Commission to seek approval or clarification regarding charges associated with energy banking.</p>
<p><strong>Gross Metering</strong></p>
<p>Under the amended regulation, the Commission has allowed gross metering. According to the amendment, gross metering involves setting up a renewable energy generation system to sell all the electricity generated to DISCOM through a power purchase agreement.</p>
<p>However, if the renewable energy generation system is linked to the consumer’s side of the meter, the existing meter must be replaced with a net meter.</p>
<p>Under the gross metering arrangement, all the electricity recorded by the generation meter will qualify for meeting the DISCOM&#8217;s renewable purchase obligations (RPO).</p>
<p><strong>Group Net Metering</strong></p>
<p>The Commission has introduced group net metering through the new amendment. It involves surplus units injected into the grid from a rooftop system or any other mounting structure in the consumer’s premises that will be adjusted against the energy consumed in the monthly bill of service connections based on a priority list and sharing ratio.</p>
<p>The adjustment priority begins after accounting for units at the service connection where the rooftop system is located.</p>
<p>The consumer can revise the priority list and share ratio for surplus energy adjustment against other electricity connections at the start of every financial year, with a two-month advance notice.</p>
<p>The electricity consumption in any time block will first be compensated with the electricity generation in similar time blocks in the same billing cycle of the consumer where the rooftop system is located.</p>
<p>Surplus units are then adjusted against the energy consumed in other service connections based on the priority list and ratios provided by the consumer. If the surplus generation/ energy credits occurred during the off-peak time block for the time of day (TOD) consumers and the normal time block for non-TOD consumers. If, during a billing period, exported units exceed imported units, the surplus units are carried forward as energy credits to the next billing period.</p>
<p>The unadjusted net credited units of electricity at the end of each financial year will be purchased by DISCOM at the generic tariff approved by the Commission for that year within the first month of the following year. However, at the beginning of each settlement period, the injected electricity carried forward will be reset to zero.</p>
<p>If the accumulated credit amount keeps increasing for three consecutive financial years, 50% of that amount will be paid in cash to the consumer within 60 days at the end of the third financial year. The remaining 50% will be credited to the second electricity bill after the end of the third financial year.</p>
<p>If there is a delay in payment or crediting beyond 60 days, the DISCOM must pay simple interest on the outstanding amount. The interest rate is determined by the prevailing one-year Marginal Cost of Lending Rate of the State Bank of India plus 150 basis points to the eligible consumer.</p>
<p>Wheeling charges and losses for surplus energy wheeling to other premises under group net metering are exempted until the installed rooftop capacity in Maharashtra reaches 5 GW.</p>
<p><strong>Net Billing Arrangement</strong></p>
<p>The Maharashtra Commission has amended the net billing arrangement. In this setup, surplus energy injected into the grid by a rooftop system is purchased by the DISCOM. The DISCOM then raises the bills on the consumer for his consumption from the grid at the approved grid tariff after giving credit for energy injected into the grid at a pre-determined tariff.</p>
<p>The accounting of electricity exported and imported by the consumer will become effective from the date of connectivity of the rooftop system with the distribution network. According to the regular metering cycle, the DISCOM must undertake a meter reading of both the renewable energy generation meter and the net meter for all eligible consumers.</p>
<p>For each billing period, the DISCOM must furnish the eligible consumer with specific information on the electricity bill. This includes details of the renewable energy generated, with an account of opening and closing balances recorded by the renewable energy generation meter. The bill must specify the quantity of electricity units consumed by the consumer, including opening and closing balances.</p>
<p>Information regarding the amount of energy injected into and drawn from the grid by prosumers is also to be included. The bill should detail the renewable energy generation units the DISCOM utilizes for RPO compliance.</p>
<p>Last December, MERC <a href="https://www.mercomindia.com/maharashtra-regulator-rejects-petition-seeking-changes-to-open-access-policy" target="_blank" rel="noopener">highlighted</a> certain crucial amendments required to rooftop solar and green energy open access regulations. The changes included leasing rooftops or premises to install a solar system and use the power through open access.</p>
<p>Subscribe to Mercom’s real-time <a href="https://mercomindia.com/product/mercoms-renewable-energy-regulatory-updates/" target="_blank" rel="noopener">Regulatory Updates </a>to ensure you don’t miss any critical updates from the renewable industry.</p>


Maharashtra Raises Net Metering Cap for Rooftop Solar Projects to 5 MW

behind-the-meter

Get the most relevant India solar and clean energy news.

RECENT POSTS